Metasurfaces have powerful light field manipulation capabilities and have been researched and developed extensively in various fields. With an increasing demand for diverse functionalities, terahertz (THz) metasurfaces are also expanding their domain. In particular, integrating different functionalities into a single device is a compelling domain in metasurfaces. In this work, we demonstrate a functionally decoupled THz metasurface that can incorporate any two functions into one metasurface and switch dynamically through external excitation. This proposed metasurface is formed by the combination of split-ring resonators and phase change material vanadium dioxide (VO2). It operates in the single-ring resonant mode and double-ring resonant mode with varying VO2 in insulating and metallic states, respectively. More importantly, the phase modulation is independent in two operating modes, and both cover a 360° cross-polarized phase with efficient polarization conversion. This characteristic makes it obtain arbitrary independent phase information on the metasurface with different modes to switch dual functions dynamically. Here, we experimentally demonstrate the functions of a tunable focal length and large-angle focus deflection of a THz off-axis parabolic mirror to verify the dual-function switching characteristics of the functionally decoupled metasurface. The functionally decoupled metasurface developed in this work broadens the way for the research and application of multifunctional modulation devices in the THz band.

Integrated metasurfaces with diversified functionalities have demonstrated promising prospects for comprehensive implementations in compact 5G/6G communication systems by flexibly manipulating electromagnetic (EM) waves. Increasingly emerged multifunctional metasurfaces have successfully revealed integrated wavefront manipulations via phase gradient arrays, coding apertures, independent polarization control, asymmetric transmission/reflection, etc. However, multifunctional metasurfaces with more degrees of freedom in terms of multi-band/broadband operation frequencies, full-space coverage, and computable array factors are still in dire demand. As a step forward in extending manipulation dimensions, we propose and corroborate a dual-band multifunctional coding metasurface for anomalous reflection, radar cross-section reduction, and vortex beam generation through full-wave analysis and experiment. Our tri-layer meta-device comprises a shared coding aperture of split-ring and cross-shaped resonators sandwiched between two layers of orthogonal wire gratings. With an approach of independent control of a reflection–transmission wavefront under orthogonal polarization states and Fabry–Perot-like constructive interference, the low-cross-talk shared coding aperture features a smooth phase shift and high efficiency for 3-bit coding in the K-band and 1-bit coding in the Ka-band. Both numerical and measured results verify that the proposed coding metasurface can effectively realize full-space EM control and improve the capacity of the information channel, which could be developed for potential applications in multifunctional devices and integrated systems.

This Letter presents a double-layer structure combining a cracked cross meta-surface and grating surface to realize arbitrary incident linear terahertz (THz) wave polarization conversion. The arbitrary incident linear polarization THz wave will be induced with the same resonant modes in the unit cell, which results in polarization conversion insensitive to the linear polarization angle. Moreover, the zigzag-shaped resonant surface current leads to a strong magnetic resonance between the meta-surface and gratings, which enhances the conversion efficiency. The experimental results show that a more than 70% conversion rate can be achieved under arbitrary linear polarization within a wide frequency band. Moreover, around 0.89 THz nearly perfect polarization conversion is realized.

In this Letter, we demonstrate a linear polarization conversion of transmitted terahertz wave with double-layer meta-grating surfaces, which integrated the frequency selectivity of a split ring resonator metasurface and the polarization selectivity of a metallic grating surface. Since the double-layer can reduce the loss, and the Fabry–Perot like resonant effect between the two layers can improve the conversion efficiency, this converter can rotate the incident y-polarized terahertz wave into an x-polarized transmitted wave with relatively low loss and high efficiency. Experimental results show that an average conversion efficiency exceeding 75% from 0.25 to 0.65 THz with the highest efficiency of 90% at 0.43 THz with only 2 dB loss has been achieved.

A polarization-insensitive, square split-ring resonator (SSRR) is simulated and experimented. By investigating the influence of the asymmetrical arm width in typical SSRRs, we find that the variation of the arm width enables a blue shift of the resonance frequency for the 0° polarized wave and a red shift of the resonance frequency for the 90° polarized wave. Thus, the resonance frequency for the 0° polarized wave and the resonance frequency for the 90° polarized wave will be identical by asymmetrically adjusting the arm width of the SSRR. Two modified, split-ring resonators (MSRRs) that are insensitive to the polarization with asymmetrical arm widths are designed, fabricated, and tested. Excellent agreement between the simulations and experiments for the MSRRs demonstrates the polarization insensitivity with asymmetrical arm widths. This work opens new opportunities for the investigation of polarization-insensitive, split-ring resonator metamaterials and will broaden the applications of split-ring resonators in various terahertz devices.